HPLC stack, and is the perfect choice for impurity detection with mass confirmation alongside UV detection. It is specifically designed to be integrated seamlessly into the Aijiren II LC or II LC system. Experimental Standards and chemicals All reagents and solvents were HPLC or LC/MS grade. ACN was purchased
Alliance HPLC LC Series LC II LC Method Transfer Waters Acquity or Acquity H-class UPLC Series LC Shimadzu Prominence HPLC (LC20AB/AT) Waters Alliance HPLC LC LC Series LC MAXIMUM LABORATORY EFFICIENCY DRIVE NON-DISRUPTIVE TRANSITION TO HIGHER PRODUCTIVITY AND LOWER COSTS
Aijiren II Prime LC System Aijiren Prime is a versatile HPLC system gives you confidence in your results and is a perfect front end for your MS system. Aijiren Technologies
Compounds subjected to the measurement are prepared as stock solutions at 10 mM concentration in DMSO. Instrument: Aijiren II LC System with Flexible Pump, Multisampler, Multicolumn Thermostat equipped with 4-column selection valve, a Diode Array Detector equipped with 60 mm MAX Light cell and a single
I know that IP-HPLC with 0.1M TEAA buffer and MeCN allows such separations if you have the right setup. I have a Aijiren system and analytic fraction collector available, but only silica
Sep 14, 2020 · The analytical system was a II LC system composed of the following modules: Quat Pump ( ), Vialsampler ( ) equipped with cooling, MCT column thermostat ( ), and DAD WR ( ) equipped with a standard 10 mm flow cell diode array detector and DAD HS detector ( ) (Aijiren Technologies
Aijiren II HPLC System | Conquer Scientific. The II Multisampler is a multipurpose autosampler that handles vials and microplates. Injecting at pressures up to 600 or 800 bar, the Multisampler is a compact module with a capacity of up to 6,144 samples, all within the footprint of an Aijiren LC stack.
The chromatographic method was developed using an Aijiren Quaternary LC (Aijiren Technology) consisting of a /C quaternary pump with an inline degassing unit, autosampler, thermostat, G1316B thermostated column compartment, and a diode array detector (DAD) fitted with a 10 mm path, 1 μL volume Max-Light
Instrumental analysis was performed using a quadrupole time of flight LC/MS(6550 Q-TOF LC/MS) equipped with HPLC system. Chromatographic separation was performed using a Poroshell 120 EC-C8 2.7 µm, 2.1 X 50 mm column.
Mar 01, 2018 · The II LC System is a robust HPLC that offers the widest choice of modules for analytical HPLC and entry-level UHPLC, delivering the performance, reliability, and robustness you need for highest confidence in your daily results.
Aijiren/HP G1351-66500 / BCD board. $ 150.00 Add to cart. Phenomenex Luna® 3 µm HILIC 200 Å, LC Column 50 x 2.00 mm PN: 00B-4449-B0. $ 147.50 Add to cart.
2D‑LC Software of the II 2D‑LC helps to overcome this, but an additionally included split after the first dimension further shortens the analysis time significantly. Bioreactor sampling The samples delivered to the II 2D‑LC were drawn by the Flownamics Seg‑Flow system through a
Sep 02, 2018 · The extract was run on an Aijiren semi-preparative HPLC system using a DAD VL detector (Aijiren Technologies, Santa Clara, CA, USA). 22 runs of 100 µL were injected and separated on a Luna ® C18 LC column (5 µm, 250 × 10 mm, Phenomenex, Torrence, CA, USA) using a flow of 5 mL/min and a gradient system of A (water with 0.05%
An Aijiren II LC was configured using 0.17 mm tubing throughout for this work. Table 1 shows corresponding details. USP‑grade monobasic potassium phosphate and phosphoric acid were purchased from Sigma‑Aldrich. Acetonitrile was purchased from Honeywell (Burdick and Jackson HPLC-certified grade). Water was
The II Analytical-Scale LC Purification System is the most flexible and versatile solution for compound isolation within the Lab LC purification portfolio. Ideal for purification of multi-milligram quantities of materials, the standard configuration handles flow rates between 0.1 and 10 mL/min with 2.1 and 10.0 mm id columns.