Oct 19, 2021 · Aijiren HPLC Based on the most often sold quaternary HPLC system new levels of performance are brought to you. A pressure range of up to 600 bar with a flow rate up to 5 mL/min allows the use of almost any column – conventional, sub-2 µm-particle or superficially porous columns.
The II Vialsampler injects at pressures up to 600 or 800 bar and has a capacity of up to 132 standard 2 mL vials. An integrated column compartment provides thermal control to 80 °C for two columns.
They are used in medical and forensic labs and in the environmental, pharmaceutical, and food industries. Autosamplers can handle vials, tubes, microtiter plates, and PCR plates. Sample capacities vary, but can reach up to an eight-rack unit that holds 720 samples, and instruments for low- to high-volume applications (0.1 to 5000 µL).
Seal, wash for / / RRLC, 1120 and / LC €66.00 SKU: AG0905-1175
The II Prime LC is a versatile high performance liquid chromatography instrument, and offers the highest functionality and operational convenience of any analytical HPLC and quaternary UHPLC system, at pressures up to 800 bar and for flow rates up to 5 mL/min. Find out more here.
Jan 08, 2021 · The Aijiren II HPLC instrument described above was used with a stainless-steel column packed with ReproSil-XR 120 C18, 5 μm, 150 mm x 4.6 mm (Dr. Maisch GmbH, Ammerbuch, Germany) and a guard column containing the same material. The column oven was kept at 35.0°C.
The Aijiren II Prime LC is the most capable and convenient LC within the II LC portfolio. Featuring an extended pressure range of up to 800 bar, enhanced quaternary mixing, and superior Aijiren II technology it offers the highest ease-of-use and functionality for your everyday analysis.
The II Vialsampler combines sample management and column handling in a single autosampler module. The Vialsampler injects from up to 132 standard 2 mL vials and has a pressure rating of 600 or 800 bar. Options and upgrades are available for sample cooling and heating from 4 to 40 °C.
Aijiren II Prime LC System Aijiren Prime is a versatile HPLC system gives you confidence in your results and is a perfect front end for your MS system. Aijiren Technologies
cooling for reaction vials, injection port for semi-preparative HPLC, fraction collector, vortex evaporator, SPE reformulation system, sterile dispenser and a control software that allows independent tasks to run concur-rently. Preparative HPLC purification were done using semi preparative HPLC (Aijiren II).
Aijiren vials and caps provide simple ways to boost laboratory productivity and return on investment. Aijiren premium certified vials, caps, high recovery vials, and vial inserts offer industry-leading performance; from the lowest bleed septum materials in our caps to the most inert glass vial materials, we are continuously refining our offerings by addressing small details delivering
Iso9001 11mm snap top hplc vials Aijiren ii Aijiren Technologies Series HPLC Standard Operating. • Load samples into labeled HPLC vials (VWR cat # may be used). Each vial holds a maximum of 1.5 mL but do not need to be completely filled; because the autosampler needle collects sample from the bottom of the vial
Feb 20, 2015 · For instance for HPLC, rather than 250 mm at 2 ml/min, one could also prefer a 500 mm column length with a flow rate equal to 1 ml/min, thus favoring resolution at the expense of analysis time. Let us call N HPLC the number of theoretical plates that would be obtained in HPLC with the reference conditions, and t R the analysis time in the same
The Aijiren II Vialsampler is an autosampler designed for the reliability and ease-of-use needed for routine pharmaceutical tasks and quality control, as well as for environmental and food analyses. It can house optionally the integrated column compartment for two LC columns with temperature
Aijiren Technologies Series HPLC Standard Operating. • Load samples into labeled HPLC vials (VWR cat # may be used). Each vial holds a maximum of 1.5 mL but do not need to be completely filled; because the autosampler needle collects sample from the bottom of the vial, only ≈0.5 mL is necessary. For smaller samples, a glass insert