Products List
Inquiry
The Chromolith ® 5-4.6 guard cartridge holder is pressure stable up to 400 bar and made of Stainless Steel. The holder is suitable to connect any Chromolith ® guard cartridge of 5 mm length and 4.6 mm I.D. to an analytical Chromolith ® HPLC column. Brochure: Race through your Separations on Any System. Chromolith® Monolithic Silica HPLC
After the holder has been installed, a guard column cartridge may be inserted and the guard column put into service. 1. Back out the thumb screw until the face of the header assembly is flush with the inside edge of the holder housing. 2. Insert the cartridge with the flow arrow pointing toward the column end of the holder housing.
Holder was designed for the filtration or aqueous and organic or corrosive liquids for particulate contamination analysis. The holder can also be used for HPLC solvent preparation. The vacuum connection is integrated into the filter holder base and flask cap, above the filtrate exit level. With this
Restek™ Guard Cartridge Holder Use with any HPLC column by connecting it with a short piece of 0.0625 in. tubing, appropriate nuts and ferrules, or finger-tight fittings. 16 Restek™ Hydroguard Water-Resistant Guard Column Extend analytical column lifetime by preventing degradation from harsh steam-cleaning water injections 17
HPLC VanGuard Cartridge Holder . Item number: WT186007949 Brand: Waters. $180.00. Excl. 19% VAT. Add to Cart. Add to Wish List. 19 x 10 mm Prep Guard Holder
Holder Kit for Cartridge and Guard Columns In order to extend the lifetime and improve the performance of analytical HPLC columns, Waters’ Sentry Guard Columns are designed to guard against particulate and chemical contamination in the mobile phase stream.
GALAK Chromatography offers HPLC and UHPLC accessories with high-performance type and economical type, including columns, guards, filters, holders, and other parts. Origin countries are China and the U.S.A. GALAK Chromatography is dedicated to providing the highest quality HPLC, UHPLC, and LC/MS products available.
This allows the cartridge holder to offer superior protection across UPLC, UHPLC, and HPLC columns with particle sizes ranging from 5 to 16 µm. This is because the packing materials used in Waters VanGuard products are identical to the packaging materials used in Waters HPLC and UPLC Columns.
The manu-CART® cartridge holder is suitable for LiChroCART® cartridges with internal diameters of 2, 3, 4 and 4.6 mm, as well as lengths of 75, 100, 125, 150 and 250 mm. A coupling unit allows swift and easy coupling of two LiChroCART® cartridges.
Description. Use the Standard Cartridge Holder to hold Aminex ® Guard Cartridges or any 30 x 4.6 mm HPLC guard cartridge to protect and extend the life of analytical columns by removing contaminants. Inlet and outlet connections on the holders are zero dead volume connections which use compression type reverse nuts and ferrules for attachment.
Requires Trident LC Column Protection System or Trident HPLC In-Line Guard Cartridge Holder 21 Restek™ Ultra Amino Guard Cartridges Protects and extends column lifetime. 22 Restek™ Ultra C1 Guard Cartridges Requires Trident LC Column Protection System or Trident HPLC In-Line Guard Cartridge Holder 23 Restek™ Ultra Silica Guard Cartridges
HPLC guard columns are short columns or cartridges that, when installed before an analytical or preparative (U)HPLC column, act as a filter to prevent particulates from entering the main column and trap any chemical contaminants with a high affinity for the stationary phase.
Description: A Trident in-line guard cartridge holder can be used with almost any HPLC column by connecting it with a short piece of 1 / 16" tu ,10853-544EA,10853-612EA HALO® Guard Column Holder, Advanced Materials Technology
Replacement Tips for UNIFILTER and UNIGUARD Direct-Connection Holders Thermo Scientific™. Use the Thermo Scientific™ Replacement Tip as a standard component for UNIFILTER™ Direct-Connection HPLC Filter Systems or for UNIGUARD™ Direct-Connection Guard Cartridge Holders.
Filter holders can withstand specific maximum pressures and have appropriate connections for use with either pressure systems or vacuum systems. Glass filter holders are designed for vacuum filtration. Stainless steel and plastic filter holders are designed for either vacuum or pressure filtration.
Description. Use the Standard Cartridge Holder to hold Aminex ® Guard Cartridges or any 30 x 4.6 mm HPLC guard cartridge to protect and extend the life of analytical columns by removing contaminants. Inlet and outlet connections on the holders are zero dead volume connections which use compression type reverse nuts and ferrules for attachment.
Glass filter holders: Due to their inert nature and broad chemical resistance, borosilicate glass filter holders are commonly used for research and small-scale filtrations. They are commonly used for filtering aqueous and organic or corrosive liquids and HPLC solvent preparation.
After the holder has been installed, a guard column cartridge may be inserted and the guard column put into service. 1. Back out the thumb screw until the face of the header assembly is flush with the inside edge of the holder housing. 2. Insert the cartridge with the flow arrow pointing toward the column end of the holder housing.
Description: A Trident in-line guard cartridge holder can be used with almost any HPLC column by connecting it with a short piece of 1 / 16" tu ,10853-544EA,10853-612EA HALO® Guard Column Holder, Advanced Materials Technology
Restek™ Guard Cartridge Holder Use with any HPLC column by connecting it with a short piece of 0.0625 in. tubing, appropriate nuts and ferrules, or finger-tight fittings. 16 Restek™ Hydroguard Water-Resistant Guard Column Extend analytical column lifetime by preventing degradation from harsh steam-cleaning water injections 17
Pistons & Seals for HPLC. Aijiren pistons are made from a high-purity, ceramic or monocrystalline sapphire for maximum durability. Aijiren seals are designed to fit perfectly around pistons, and are capable of adapting to a wide range of flow rates and pressures. The combination of our piston and seal has undergone extensive testing under
GALAK Chromatography offers HPLC and UHPLC accessories with high-performance type and economical type, including columns, guards, filters, holders, and other parts. Origin countries are China and the U.S.A. GALAK Chromatography is dedicated to providing the highest quality HPLC, UHPLC, and LC/MS products available.
Requires Trident LC Column Protection System or Trident HPLC In-Line Guard Cartridge Holder 21 Restek™ Ultra Amino Guard Cartridges Protects and extends column lifetime. 22 Restek™ Ultra C1 Guard Cartridges Requires Trident LC Column Protection System or Trident HPLC In-Line Guard Cartridge Holder 23 Restek™ Ultra Silica Guard Cartridges
The manu-CART® cartridge holder is suitable for LiChroCART® cartridges with internal diameters of 2, 3, 4 and 4.6 mm, as well as lengths of 75, 100, 125, 150 and 250 mm. A coupling unit allows swift and easy coupling of two LiChroCART® cartridges.
This allows the cartridge holder to offer superior protection across UPLC, UHPLC, and HPLC columns with particle sizes ranging from 5 to 16 µm. This is because the packing materials used in Waters VanGuard products are identical to the packaging materials used in Waters HPLC and UPLC Columns.
The Sentry Guard column is available as an included part of Waters cartridge columns, and the Holder Kit for Cartridge and Guard Columns can be purchased separately as a stand-alone holder for use with any Waters analytical HPLC column. The kit is made with an inner diameter of 4.6 mm and a length of 20 mm. Operating limits include a maximum
Replacement Tips for UNIFILTER and UNIGUARD Direct-Connection Holders Thermo Scientific™. Use the Thermo Scientific™ Replacement Tip as a standard component for UNIFILTER™ Direct-Connection HPLC Filter Systems or for UNIGUARD™ Direct-Connection Guard Cartridge Holders.
HPLC VanGuard Cartridge Holder . Item number: WT186007949 Brand: Waters. $180.00. Excl. 19% VAT. Add to Cart. Add to Wish List. 19 x 10 mm Prep Guard Holder
HPLC guard columns are short columns or cartridges that, when installed before an analytical or preparative (U)HPLC column, act as a filter to prevent particulates from entering the main column and trap any chemical contaminants with a high affinity for the stationary phase.
Holder was designed for the filtration or aqueous and organic or corrosive liquids for particulate contamination analysis. The holder can also be used for HPLC solvent preparation. The vacuum connection is integrated into the filter holder base and flask cap, above the filtrate exit level. With this…
The Chromolith ® 5-4.6 guard cartridge holder is pressure stable up to 400 bar and made of Stainless Steel. The holder is suitable to connect any Chromolith ® guard cartridge of 5 mm length and 4.6 mm I.D. to an analytical Chromolith ® HPLC column. Brochure: Race through your Separations on Any System. Chromolith® Monolithic Silica HPLC
After the holder has been installed, a guard column cartridge may be inserted and the guard column put into service. 1. Back out the thumb screw until the face of the header assembly is flush with the inside edge of the holder housing. 2. Insert the cartridge with the flow arrow pointing toward the column end of the holder housing.
The manu-CART® cartridge holder is suitable for LiChroCART® cartridges with internal diameters of 2, 3, 4 and 4.6 mm, as well as lengths of 75, 100, 125, 150 and 250 mm. A coupling unit allows swift and easy coupling of two LiChroCART® cartridges.
Restek™ Guard Cartridge Holder Use with any HPLC column by connecting it with a short piece of 0.0625 in. tubing, appropriate nuts and ferrules, or finger-tight fittings. 16 Restek™ Hydroguard Water-Resistant Guard Column Extend analytical column lifetime by preventing degradation from harsh steam-cleaning water injections 17
Requires Trident LC Column Protection System or Trident HPLC In-Line Guard Cartridge Holder 21 Restek™ Ultra Amino Guard Cartridges Protects and extends column lifetime. 22 Restek™ Ultra C1 Guard Cartridges Requires Trident LC Column Protection System or Trident HPLC In-Line Guard Cartridge Holder 23 Restek™ Ultra Silica Guard Cartridges
Replacement Tips for UNIFILTER and UNIGUARD Direct-Connection Holders Thermo Scientific™. Use the Thermo Scientific™ Replacement Tip as a standard component for UNIFILTER™ Direct-Connection HPLC Filter Systems or for UNIGUARD™ Direct-Connection Guard Cartridge Holders.
The SecurityGuard ULTRA cartridge provides maximum protection by trapping contaminants and particulates. SecurityGuard ULTRA cartridge is disposable and allows for quick and easy replacement. Holder The SecurityGuard ULTRA reuseable holder has an auto adjusting tip that provides a leak-free connection to virtually any UHPLC column.
Holder Kit for Cartridge and Guard Columns In order to extend the lifetime and improve the performance of analytical HPLC columns, Waters’ Sentry Guard Columns are designed to guard against particulate and chemical contamination in the mobile phase stream.
GALAK Chromatography offers HPLC and UHPLC accessories with high-performance type and economical type, including columns, guards, filters, holders, and other parts. Origin countries are China and the U.S.A. GALAK Chromatography is dedicated to providing the highest quality HPLC, UHPLC, and LC/MS products available.
Description: A Trident in-line guard cartridge holder can be used with almost any HPLC column by connecting it with a short piece of 1 / 16" tu ,10853-544EA,10853-612EA HALO® Guard Column Holder, Advanced Materials Technology
Description. Use the Standard Cartridge Holder to hold Aminex ® Guard Cartridges or any 30 x 4.6 mm HPLC guard cartridge to protect and extend the life of analytical columns by removing contaminants. Inlet and outlet connections on the holders are zero dead volume connections which use compression type reverse nuts and ferrules for attachment.
Shop Now Filter Holders With a chemically resistant and polypropylene construction, resistant to common HPLC mobile phase solvents such as methanol, acetonitrile, and tetrahydrofuran. It accepts 47 mm disc filters with choice of membrane based on the type of solvent or solution being filtered.
Pistons & Seals for HPLC. Aijiren pistons are made from a high-purity, ceramic or monocrystalline sapphire for maximum durability. Aijiren seals are designed to fit perfectly around pistons, and are capable of adapting to a wide range of flow rates and pressures. The combination of our piston and seal has undergone extensive testing under
Filter holders can withstand specific maximum pressures and have appropriate connections for use with either pressure systems or vacuum systems. Glass filter holders are designed for vacuum filtration. Stainless steel and plastic filter holders are designed for either vacuum or pressure filtration.
HPLC VanGuard Cartridge Holder . Item number: WT186007949 Brand: Waters. $180.00. Excl. 19% VAT. Add to Cart. Add to Wish List. 19 x 10 mm Prep Guard Holder